The BACtwin Wizard is now open source
DiLT Analytics is releasing the BACtwin Wizard as open source. The tool translates the data point names of existing building automation systems into the uniform naming scheme defined by BACtwin. Every translation step is recorded and can be repeated.
We built the Wizard for our own projects. We are making the base version available to everyone because a standard only takes effect once it is widely used.
The problem: every system speaks its own language
In building automation, every measured value, alarm and meter has a name, known as the data point name. What these names look like is usually decided by the system integrator. A temperature sensor is called 108_L_01 ZUL_TE_M in one building and something entirely different in the next. If you only look after one building, you can live with that. If you want to compare data across several sites, analyse it or hand it over to another system, you first have to translate it.
This translation is manual work, and it does not scale. Our demo project alone contains 7,214 data points from 15 devices. In 2025, Vienna Airport reported around 200,000 data points and named as a key challenge the large number of names that are neither standardised nor translatable by script (Vienna Airport, BACtwin conference 2025). The result typically ends up in a spreadsheet. Later on, it is hard to tell why a name was chosen, and the next building starts again from scratch.
BACtwin: one shared data model instead of many in-house conventions
BACtwin stands for the digital twin of building automation. It was developed by AMEV, the German working group for mechanical and electrical engineering of state and municipal administrations. AMEV published the BACtwin library and its description on 12 April 2024; at the same time, the German Federal Building Ministry introduced the recommendation (No. 174) for federal buildings (Hardkop, BACtwin Forum 2024). The current edition is BACtwin 2026.
BACtwin is more than a naming convention. The library describes more than 300 object templates and more than 100 standard aggregates such as pumps, valves and fans. At the core of the naming is the user addressing system BACtwin-BAS. It builds on VDI 3814 and is designed so that both people and software can read a name unambiguously. Every name is made up of fixed building blocks:
| Block | Example | Meaning |
|---|---|---|
| Trade | 430 | Ventilation and air conditioning |
| System | VKA01 | Full air-conditioning system |
| Assembly | VEH01 | Pre-heater |
| Medium, location | ZU~ | Supply air |
| Aggregate | EF~01 | Groups one or more pieces of equipment |
| Equipment | TSL01 | Low-temperature switch |
| Function | GM~01 | Hazard alarm |
We consider BACtwin the best approach currently available for standardising BMS data point names. Its value lies in giving a data point not just a name but a meaning that software can evaluate. Only then can analytics, monitoring or a semantic twin of the installation, such as in our software FaciliMind, be built across many buildings.
What the open-source BACtwin Wizard does
The Wizard does not translate name by name but in groups. Each group is described by a rule based on regular expressions (regex), and each rule is saved as a step. The workflow:
- Import data points. The input is EDE files, the common exchange format for BACnet data point lists. If a file changes, it is re-imported; existing assignments are kept.
- Select a group. A condition describes which data points are meant, for example all whose name starts with B1. Comparisons such as “equals” or “empty” are available, as well as regular expressions for text patterns.
- Assign building blocks. BACtwin blocks are assigned to the group, either as a fixed value or taken from another field. Before saving, the table shows which data points are matched and which only just miss.
- Check. Unknown keys, incomplete names and duplicate names are flagged. For every data point you can see which step changed it.
- Export. The result goes out as a replacement table (old name, new name) or as a complete data point table in XLSX or JSON.
The key element is the mapping sequence. It lives in separate files and can be linked into other projects. In our demo project, we linked three existing sequence files for Siemens systems. This brought 109 ready-made steps into the project. Afterwards, 45 percent of the 7,214 data points were assigned a trade and 39 percent a system, without an engineering team having to write new sequences.
The keys available for selection come from reference data plugins, for example for AMEV BACtwin 2026. These rules act as automated guidance: a deviating value is still written but flagged, so that technical decisions remain with people.
What this means, even without technical knowledge
Think of BACtwin as a postal address. Country, town, street and house number always sit in the same place, which is why every letter reaches its destination. In the same way, a BACtwin name tells you in which building, in which system and on which component a measured value originates. The Wizard is the tool that moves old, inconsistent addresses into this scheme.
For operators, owners and facility managers, this means:
- Comparable data. A name means the same thing in every building. Portfolio-wide analysis becomes possible without having to clarify each time what a data point actually is.
- Less manual work. Instead of renaming thousands of rows one by one, you describe a group once. In our example, a single rule assigned the location block to 2,283 data points.
- Traceable decisions. For every name, you can show which rule produced it. That helps with audits, handovers and staff changes.
- Reusable work. Rules for one type of system can be used again in the next building. Each project makes the next one cheaper.
- No lock-in. The standard, the tool and the output files are open. The data belongs to the operator, not to a software vendor.
- No guesswork from LLMs and the like. Deterministic translation keeps mappings traceable and trustworthy.
Why we are releasing the Wizard
AMEV deliberately designed the BACtwin data model as an open, modular system. Tools that implement the standard should be open too. Anyone switching to BACtwin today usually has a large existing estate, and it can rarely be translated fully automatically. In a field test, TU Braunschweig converted around 80 percent of 5,000 data points automatically; the rest had to be resolved by hand (Zeuner, BACtwin Forum 2025). All of these steps take considerable time and expertise. The Wizard makes sure they are documented and repeatable as well.
The more operators, planners and integrators share their sequences, the less each of them has to reinvent. We welcome exchange of experience, feedback, bug reports and, above all, sequences for systems and manufacturers we do not yet cover.
Getting started: The source code and licencing is available in our GitHub repository.
We are also happy to provide the compiled version- Please write an email to bactwin-wizard@dilt.at.1
To get started, there are three short guides and short videos available: First steps and EDE import, Setting the location BAS, and Linking mapping sequences. Questions are answered at bactwin-wizard@dilt.at.
Notes:
The open source tool was developed in the project BOSS (FO99992319). The project is funded by the FFG (www.ffg.at). The FFG is the central national funding agency and strengthens Austria’s innovative capacity.
Sources
- Jürgen Hardkop: Der BACtwin und seine Verbreitung 5 Jahre nach seiner Geburt, talk, BACtwin Forum 2024
- Vienna Airport: AMEV BACtwin – Anwendungserfahrung, BACtwin conference 2025
- Sören Zeuner: AMEV BACtwin – Praxiserfahrungen TU Braunschweig, talk, BACtwin Forum 2025
Footnotes:
1) By contacting us, you agree that DiLT Analytics FlexCo (Nikolaiplatz 4a, 8020 Graz) may process your email address and any other information you voluntarily provide in exchange for making the Bactwin Wizard available to you, and that it may contact you via email. This contact includes information and offers related to Bactwin as well as other analysis and diagnostic solutions from DiLT Analytics. You may revoke your consent at any time without providing a reason by contacting office@dilt.at. The revocation does not affect the lawfulness of the processing that has taken place up to that point, nor does it affect your right to continue using the Wizard.